SunHome Multifunction Home Gym System Workout Station,Smith Machine with 138LB Weight Stack, Leg Press, LAT Station for Full Body Training

Sunhome Smith Machine Home Gym – Great Value, but Some Design Quirks
The Smith Machine Home Gym is a well-rounded piece of equipment for those looking to build a versatile home gym on a budget. At $880 shipped with a coupon at the time of purchase (price subject to change), it offers a solid mix of features, including a Smith bar, cable system, leg press, and pull-up station. However, there are a few design flaws that require creative solutions.ProsThis machine provides a sturdy frame and a good variety of workout options for the price. It functions well for most exercises and, with the right modifications, can accommodate a full-body routine. When paired with an adjustable bench, such as the Fostoy Adjustable Weight Bench (approximately $120 at the time of purchase), it becomes even more versatile with the ability to perform leg extensions and leg curls, along with a preacher curl attachment.Cons & Workarounds1. Cable Length Limitation on Adjustable Pulleys• The cables bottom out too soon when using both pulleys at the same time, limiting the full range of motion. The seller confirmed this is a design flaw.• One solution is to use chain extensions (included with the machine) for each pulley and adjust your standing position until you achieve full range of motion. Another alternative is to sit on a bench or kneel to engage your core while performing movements like cable flys.• At 6’0”, I was able to make these adjustments work.2. Smith Machine Height Restriction for Calf Raises• The height of the machine prevents proper calf raises on the Smith bar.• There is no direct fix, but alternative options include using a hack squat machine like I bought on Amazon (MDeam is the brand, check out my review on that as well), or performing seated dumbbell calf raises on a small platform for better range of motion.3. Slack in the Pulley System for Leg Press, Chest Press, and Flys• The pulley system has noticeable slack, which reduces resistance at the start and end of movements.• To fix this, I placed a 2” piece of 2×4 between the rubber bumper of the leg press, which removed the slack and maintained consistent resistance throughout the range of motion.• Important Note: The block must be removed before adjusting weights, or it will be difficult to insert the pin into the stack.4. Pull-Up Bar Foam Grip Feels Cheap• The foam grip isn’t ideal for my preference. A bare metal bar with grip tape would have been a better design choice.5. Seat Back and Height Are Not Adjustable• The backrest is fixed, which means certain exercises require adjusting your body position manually.• The seat height is also non-adjustable, which may be an issue for some users, though it wasn’t a concern for me.Final ThoughtsThis Smith Machine Home Gym is a solid purchase for the price, with a wide range of functionality. While some design flaws exist, most can be worked around with slight modifications. If you’re looking for an affordable all-in-one home gym and are willing to make a few adjustments, this is a good investment—but keep in mind the price may change over time.

Great Company!! Fantastic service
I give this gym 5 stars. A few of the parts were damaged upon arrival, but I contacted the company and they were extremely cooperative with assisting with sending replacement parts free of any additional charge. Fantastic company!!

decent for home grade
It’s a good machine for ‘home grade.’ One of my biggest complaints is the foot pads on the leg press. The workout feels lackluster, like it’s not really providing any benefit to my legs, even when I increase the weights. When I use the term ‘home grade,’ I mean that the wire tension gives it a cheap, non-gym-quality feel. The Smith machine part is good, except the release hook for the bar can sometimes be difficult to place back properly, which could be an issue with heavy weights. Bottom line: it’s a good starter gym for home use, but I wouldn’t recommend paying more than $800 for it. I got it on sale with a coupon at that price.The setup took me 8 hours to complete. I used the video on YouTube as well as the instruction manual. I also used a ratchet setup. There will be one part where you’ll need at least two or three people. It’s when setting up the top part before the pull-up bar. Two people had to hold the bars in place while I screwed in the screws.